Not all door seals are fitted directly onto the surface of a door. In some applications, a recessed fitting is preferred, particularly where a surface-mounted seal is unsuitable or a more discreet finish is required.
A Rebated Door Seal is designed to fit into a prepared groove or recess in the door or frame. But how does it work, and when should you choose one instead of a standard surface-mounted seal?
A rebated door seal is a brush strip designed to sit within a recessed section of a door or its frame, rather than being fixed onto the surface.
The carrier fits into the prepared rebate, while the brush bristles extend beyond it to make contact with the adjoining surface when the door is closed.
Because much of the carrier sits within the recess, this type of seal offers a less visible alternative to a surface-mounted brush strip.
A rebated door seal is particularly useful when the door or frame has a suitable recess, or where a surface-mounted carrier would interfere with the door’s operation.
It may be worth considering when:
Before choosing a rebated seal, check that the door construction and available rebate dimensions are suitable.
A Rebated Door Seal sits within a prepared groove, leaving the brush exposed to seal against the adjoining surface. This requires a compatible recess in the door or frame.
A Surface-Mounted Door Seal, such as Formseal’s Bottom Door Seal, is attached directly to the door surface using its carrier.
Surface-mounted seals are easier to fit to existing doors without a rebate. Rebated seals are suitable for doors that allow recessed installation.

Formseal offers two domestic brush seal products designed for recessed applications.
Rebated Door Seal
Formseal’s Domestic Doors – Rebated Door Seal is designed for situations where surface-mounted fixing is not suitable.
Supplied in a standard 3-metre length, it is available in two rebate profiles: 5.50 × 5.50 mm and 6.50 × 7.80 mm. The range is suitable for both inward and outward opening doors, provided the chosen profile and brush trim match the installation.
Centre Door Seal
Formseal’s Domestic Doors – Centre Door Seal is another rebated brush seal intended for applications where a surface-mounted fixing is unsuitable.
It has a 5 × 12 mm carrier profile and is available with 8 mm, 10 mm, 12 mm and 15 mm brush trims. This provides an alternative recessed profile where the dimensions of the standard rebated door seal are not suitable.
Check the dimensions of the existing rebate or the space available for a new one.
Measure the width and depth of the recess, then check the distance the brush needs to cover. The carrier must fit the rebate correctly, while the bristles should make contact without excessive compression. Also check the door’s opening direction and the required seal length to ensure the chosen product suits the application.
For other fixing options, explore Formseal’s Domestic Door Sealing range to compare recessed, surface-mounted and self-adhesive seals.
You can also request a sample from us! Our team will be happy to help with any questions you may have at +44 (0)1785 284808.
Small gaps around a garage door can provide easy entry points for unwanted pests. Learn how to spot these gaps, how garage door seals can help and what else you can do to keep pests out.
Strimmer and brush cutter brushes help remove weeds from paving, kerbs and hard-to-reach areas. Formseal offers twisted steel wire brushes for stubborn weeds and synthetic brushes for lighter vegetation. Discover which brush is best suited to your surface and application.
Not sure if this product is right for your application? Request a free sample!